Item No.: KD6110
Abrasive Grain |
Base |
Grit Gange |
Dia. |
Hole Dia. |
Max R.P.M. |
Types |
Aluminum Oxide |
Plastic |
P40--P400 |
2" (50mm) |
5/8" (16mm) |
15200 |
R |
3" (75mm) |
5/8" (16mm) |
15200 |
Item No.: KD6120
Abrasive Grain |
Base |
Grit Gange |
Dia. |
Hole Dia. |
Max R.P.M. |
Types |
Heated Aluminum Oxide |
Plastic |
P40--P400 |
2" (50mm) |
5/8" (16mm) |
15200 |
R |
3" (75mm) |
5/8" (16mm) |
15200 |
Item No.: KD6131
Abrasive Grain |
Base |
Grit Gange |
Dia. |
Hole Dia. |
Max R.P.M. |
Types |
Zirconia Aluminum |
Metal |
P36--P120 |
2" (50mm) |
5/8" (16mm) |
15200 |
R |
3" (75mm) |
5/8" (16mm) |
15200 |
Item No.: KD6140
Abrasive Grain |
Base |
Grit Gange |
Dia. |
Hole Dia. |
Max R.P.M. |
Types |
Ceramic Oxide |
Plastic |
P36--P120 |
2" (50mm) |
5/8" (16mm) |
15200 |
R |
3" (75mm) |
5/8" (16mm) |
15200 |
Applicable Industries:
■ Chemical and processing industries ■ Fitting and container construction
■ Steelworks ■ Foundries ■Tool and mould construction
■ Pipeline construction ■Dockyards ■ Automotive industry
■ Steel construction, locksmiths
■ Aviation and aerospace, gas turbine construction and repair
■ Machine engineering
Grit Recommended:
Grit
Spec.
Applications
Suggested Progress
P60 P80
Coarse
For removal and leveling of moderate surface imperfections
■Derusting ■Deburring
P100-- P240
Medium
For smoothing and light removal on bare surfaces
■Grinding■Cleaning
P320 P400
Fine
For bare surface cleaning and finishing
■Cleaning ■Polishing
Introduction for Abrasives :
A/O: Alumimun Oxide
Aluminum Oxide grain which has high efficiency grinding performance. Cotton cloth base synchronous consumption fast, does not burn the workpiece.Glassfiber backing and plastic backing available.
With efficient grinding and polishing effect, the product is windly applied in the metal, stainless steel, wood, etc
C/O: Ceramic Oxide
With high quality ceramic grinding grain, which can quickly and efficiently finish the surface treatment of the workpiece. It has excellent effect for polishing the stainless steel.Glassfiber backing and plastic backing available.
Z/A: Zirconia Alumia
For grinding the stainless steel workpiece, the zirconia grain with outstanding effect and high efficiency. In addition to stainless steel, it is also used for the metals.Glassfiber backing available.
Instructions:
1. Please try to choose operation indoors environment which without clutter phenomenon. The user should also concentrate on the operation to avoid an accident. If use it at outdoor, try to choose a quiet environment.
2. During the grinding process, the workpiece should be kept parallel to the working water level.
3. The user's power should be evenly distributed when operation. Never suddenly heavy and lightly.
4. Avoid moving or slipping the workpiece during grinding.
Warning:
1. Must wear dustproof mask and goggles when working.
2. Never exceed the maximum safe speed.
3. Discs must be mounted correctly and used with metal guards and goggles.