Item No.: KD8210
Abrasive Grain |
Base |
Coating |
Available Sizes |
Available Shapes |
Aluminum Oxide |
Film |
Open Coated
Special Coated |
2"/3"/4"/4.5"/5"/6"/7"/9"/12" |
|
Main Grit
Item No.: KD8220
Abrasive Grain |
Base |
Coating |
Available Sizes |
Available Shapes |
Aluminum Oxide |
D-weight Paper
E-weight Paper
|
Semi-Open Coated
Special Coated
|
2"/3"/4"/4.5"/5"/6"/7"/9"/12" |
|
Main Grit
Item No.: KD8230
Abrasive Grain |
Base |
Coating |
Available Sizes |
Available Shapes |
Aluminum Oxide |
D-weight Paper
E-weight Paper
|
Semi-Open Coated
Special Coated
|
2"/3"/4"/4.5"/5"/6"/7"/9"/12" |
|
Main Grit
Item No.: KD8240
Abrasive Grain |
Base |
Coating |
Available Sizes |
Available Shapes |
Aluminum Oxide |
D-weight Paper
E-weight Paper
|
Semi-Open Coated
|
2"/3"/4"/4.5"/5"/6"/7"/9"/12" |
|
Main Grit
General Application of Grit
Grit |
Spec. |
Applications |
60#80# |
Coarse |
For removal and leveling of moderate surface imperfections |
100#120# |
Medium |
For smoothing and light removal on bare surfaces |
150#180# |
Fine |
For bare surface cleaning and finishing |
220#240#320#400# |
Very Fine |
For primer and sealer sanding, and other very fine sanding of bare surfaces. |
600#800#1000#1500#2000# |
Extra Fine |
Between coatings, primer and sealer sanding |
Application of
Hook and Loop Sanding Disc
Item |
Recommand
Grit Range |
Work Process |
|
Coarse (40#-150#) |
.Poly-putty grinding |
.Remove paint |
||
.Automotive putty grinding |
||
.Wall putty grinding |
||
Medium& Fine
(180#-2000#) |
.Primer/Base coat grinding |
|
.Paint surface grinding |
||
|
40#-600# |
.Hardwood grinding |
.Grinding of automotive body sheet metal parts |
||
.Metal grinding |
||
.Plastic grinding |
Recommended Sanders for 5" Hook & Loop Disc
Introduction for Abrasives :
A/O: Alumimun Oxide
Aluminum Oxide grain which has high efficiency grinding performance. Cotton cloth base synchronous consumption fast, does not burn the workpiece.Glassfiber backing and plastic backing available.
With efficient grinding and polishing effect, the product is windly applied in the metal, stainless steel, wood, etc
C/O: Ceramic Oxide
With high quality ceramic grinding grain, which can quickly and efficiently finish the surface treatment of the workpiece. It has excellent effect for polishing the stainless steel.Glassfiber backing and plastic backing available.
Z/A: Zirconia Alumia
For grinding the stainless steel workpiece, the zirconia grain with outstanding effect and high efficiency. In addition to stainless steel, it is also used for the metals.Glassfiber backing available.
Instructions:
1. Please
try to choose operation indoors environment which without clutter phenomenon. The
user should also concentrate on the operation to avoid an accident. If use it at
outdoor, try to choose a quiet environment.
2. During the
grinding process, the workpiece should be kept parallel to the working water
level.
3. The user's power should be evenly distributed when operation. Never suddenly heavy and lightly.
4. Avoid moving or slipping the workpiece during grinding.
Warning:
1. Must wear dustproof mask and goggles when working.
2. Never exceed the maximum safe speed.
3. Discs must be mounted correctly and used with metal guards and goggles.